Many manufacturers applying miniature water pumps and small portable water pumps to home appliances and medical devices frequently encounter air clog problems. Below, we list feasible troubleshooting methods, and most matching systems adopt a small solenoid valve plus a brushless dc motor for stable fluid control.

 

Air clogs often occur during water pump operation, which can affect the normal operation and efficiency of the pump. Here are some solutions to air clog problems:

 

1. Check the suction pipe: Ensure the suction pipe is free of leaks or damage, especially the part connecting to the pump inlet. If leaks or damage are found, repair or replace the problematic part.

 

2. Reduce air intrusion: Ensure the suction pipe is well-sealed. Use sealant or rubber gaskets to enhance the seal. Additionally, completely immersing the suction pipe in water can reduce the possibility of air intrusion.

 

3. Fill the pump with water: Before starting the pump, fill the pump body and suction pipe with an appropriate amount of water to expel air from the pipes. This can be done using manual or automatic filling equipment.

 

4. Regularly bleed the air: Regularly bleed the air is an important measure to prevent air clog problems. Expel air from the pump body and piping by opening the vent valve or vent bolt. Ensure the pump's operating condition and safety are maintained during venting.

 

5. Install an air valve: Installing an air valve at the highest point of the suction pipe allows for automatic air removal, effectively reducing the possibility of air blockage.

 

6. Increase pumping depth: If the water source is shallow, the pump is prone to introducing air. Try lowering the suction pipe to a deeper position to prevent air from entering the pump body.

 

7. Clean the filter: Regularly cleaning the filter prevents impurities from clogging the suction pipe, improving pumping efficiency and reducing the risk of air entering the piping.

 

In summary, the key to solving water pump air problems is maintaining the airtightness of the suction pipe, increasing the pumping depth, regularly venting air, and cleaning the filter. Choosing the appropriate method based on the actual situation can effectively solve water pump air problems and ensure the normal and efficient operation of the pump. These are the solutions I can provide for water pump air issues.